12m HGV Tyre Inflator Air Line Hose with 8mm Clip-on Valve (Direct Feed)

Overview
A commercial-grade, direct-feed pneumatic air line designed for HGVs, LGVs, coaches, and heavy plant machinery. Featuring an extended 12-metre heavy-duty EPDM hose and a standard 8mm clip-on valve connector, this unit provides a high-flow, direct inflation line for rapid tyre maintenance utilizing the vehicle's onboard air supply.
 
Practical Application
While 10 metres is standard, the upgraded 12-metre length provides a critical 20% extra reach. This extra slack is ideal for servicing longer rigid trucks, large passenger coaches, or plant equipment where air connection points are less accessible, allowing operators to work freely without putting tension on the hose.
The hose is fitted with a standard 8mm clip-on valve connector. This design locks securely onto the tyre valve, providing a leak-free, hands-free seal so the operator is not forced to hold the connector in place during high-volume inflation. Manufactured from reinforced EPDM rubber, the air line withstands the abrasive conditions of transport yards and workshop floors.
 
Workshop Note:
Please note this specific kit is a direct-feed inflation line and does not include an inline pressure gauge dial. It is intended for use with regulated air supplies or systems where pressure is monitored at the source.
 
Technical Specifications
System Type: Direct-feed inflation (No gauge)
Hose Length: 12 Metres (Extended reach)
Material: Reinforced EPDM Rubber
Valve Connector: Standard 8mm Clip-on
Operating Pressure Limit: 12 Bar / 170 PSI
Fittings: Solid metal construction
Supply: Direct On-Board Air